Jensen Vintage C12K & N12K - Supercabinet IR Library

The official Jensen IR library based on the 12" C12K&N12K, 35W, Ceramic speaker from the Vintage series.

SuperCabinet or TH-U Premium are Required.

$29.00

Jensen Vintage C12K & N12K - Supercab IR Library

While not strictly a vintage reissue, the C12K is the first original design that Jensen developed in the early ‘90s. It is tonally inspired by the classic vintage ceramic Jensen, but with a substantially stronger voice, full, solid bass and smooth top end. The C12K immediately became one of the speakers of choice for Fender®, used in a myriad of world-selling models since then. Vintage tone with modern power handling and dynamics are the key virtues of the C12K, in the classic 1x12 and 2x12 Open Back enclosures, typical of the contemporary Fender combo amps, each captured with 18 mics in 16 positions each.

The N12K was developed in conjunction with Fender® as the speaker for the new Fender® Tone Master™ Deluxe Reverb® and Twin Reverb®. It delivers the same sound, character and dynamic feel of the classic Jensen C12K with half the weight, thanks to the exclusive Jensen Neodymium magnet design (the same magnet used in the Tornado series). The N12K exhibits a full bodied tone with a hint of a more “modern”, transparent lower midrange, along with the same, remarkable headroom and just the right amount of treble, to sound clear and even. The cabinet selection is the same of the C12K: 1x12 and 2x12 Open Back, with 18 mics and 16 positions.

Also Includes The Remastered Version

This library also includes the remastered version of all the IRs.

The vintage Jensen speakers were designed mainly for clean tones. The maximum overdrive achievable back in those days was generated by the amplifier’s natural clipping and compression, and maybe by some of the earlier fuzz pedals. Those speakers were voiced for sparkly, shimmering treble response, with a remarkable amount of energy well over 6kHz, to be coupled with the warm sounding circuits, and the thin, resonant cabinets of the era.

The IRs of the Vintage Jensen Speakers behave exactly as expected, bright, clear and detailed.

In the modern world, especially with high gain tones, naturally very rich of harmonic overtones, all this energy in the treble range may sometimes turn in an overly bright, aggressive tone.

To further expand the possible applications of these historical speakers, we decided to offer all the Vintage Jensen IRs also in a “Remastered” option, where we finely tuned the top end response to be warmer and less prominent, so to make it suitable also in more contemporary, higher gain applications.

A sort of virtual “aged tone”, that offers a whole new range of sounds for every application. All the IRs in the library are effectively doubled by the “Remastered” version, opening up new possibilities to the player, once again “beyond the original hardware”.

The microphones used during the capturing session are:

  • AKG C12

  • AKG* C414

  • AKG C414 XLS

  • Audio Technica AT4033

  • Beyerdynamic M160
  • Coles 4038

  • Electrovoice* RE16

  • Groove Tubes MD1

  • Neumann KM84

  • Neumann U47

  • Neumann U87

  • RODE NT1

  • Royer R121

  • Sennheiser E609

  • Sennheiser* MD421

  • Shure B52

  • Shure* SM57

  • Shure SM58

  • Shure SM81

Every microphone was moved to four different horizontal positions (Cap, Cap Edge, Cone and Cone Edge) and two distances and two angulations, for a total of 16 IRs each.

All the measurement set has been repeated for each one of the cabinet in the library.

All IRs have been phase aligned and they can be blended without phase cancellations.

MADE FOR THE SUPERCABINET

This library was created for the TH-U SuperCabinet that allows you to:

  • Graphically browse the IRs in the library

  • Blend multiple IRs and create totally custom and huge stereo guitar tones

  • Compose new cabinet tones with the unique Multiband mode

  • Export your crafted IRs in .wav format for use with all major hardware modelers and software IR loaders

 

* Any use of third party trademarks, logos, mentioned brand names, products and services is only referential and Overloud hereby disclaims any Sponsorship, Affiliation or Endorsement of or by any such third party.

TH-U Premium OR SuperCabinet is Required

Please check System Requirments for each of these products for more information.

APPLE SYSTEM REQUIREMENTS

Supported Plug-in Formats: AudioUnit, VST, AAX64 (ProTools 11 and 12). Standalone.
System: Intel and Apple Silicon are supported natively.

Macintosh® Intel Core i3 1.4GHz with 4Gb of RAM, 1280x800 video.
Mac OS X 10.9 Mavericks and above are supported.

You can authorize up to three computers that you own. Additionally, you can authorize one USB drive. Software authorization is a simple, one-click procedure (no hardware key needed).

Supported DAWs on macOS

  • ProTools 11 and above
  • Logic Pro 10.0 and above  
  • Cubase 6 and above
  • Ableton Live 6 and above
  • Digital Performer 7 and above
  • Nuendo 5 and above
  • MainStage 2 and above      
  • Garage Band 10 and above   
  • Final Cut Pro X 10 and above  
  • Studio One
  • REAPER

WINDOWS SYSTEM REQUIREMENTS

Supported Plug-in Formats: VST, AAX64 (ProTools 11 and 12). Standalone.
System: 32bit and 64bit are natively supported, except AAX32.

Core i3 1.4GHz with 4Gb of RAM, 1280x800 video. 
Windows 7 and above are supported.

You can authorize up to three computers that you own. Additionally, you can authorize one USB drive. Software authorization is a simple, one-click procedure (no hardware key needed).

Supported DAWs on Windows

  • ProTools 11 and above
  • Cubase 6 and above
  • Ableton Live 6 and above
  • SONAR X3 and Platinum
  • Digital Performer 7 and above
  • Nuendo 5 and above
  • Studio One
  • REAPER

Related products

Check items to add to the cart or