Welcome to ILIO!
This exciting software gives you six Markbass heads, nine Markbass cabinets and a rich pedalboard to complete your rig.
Key Features
...and more
TA501 500W Bass Head
The popular TA501 amp head helps smooth out your sound with a high-quality onboard tube compressor, featuring a JJ Electronics ECC81 tube. Tone-wise, your sound is warmed up by the tube even when the compressor is off. It also includes foot-switchable mute-to-tune, an EQ bypass, ground lift to eliminate hum, exclusive Markbass' VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters, and high-quality Neutrik Speakon Combo out jacks for use with 1/4" or Speakon speaker cables.
Classic 300 300W Tube Bass Head
The Markbass Classic 300 bass amp's heart beats with the power of JJ Electronics tubes–2 ECC83 preamp tubes, 2 ECC99 tubes, and 6 KT88 power tubes–which give you the warmth and fullness of the great old amps that are now aging or retired. A massive 300W of tube-driven power will handle just about any venue imaginable. But times have changed, and this bass head comes with a brain: an onboard microprocessor re-biases your tubes every time you start up the Markbass Classic amp.
R500 500W Bass Head
The Markbass R500 is a bass amplifier head that will have you rocking out old-school, rocking hard, creating your own alternative rock, or shredding up the stage stealing the spotlight from your guitarists! The 500W analog R500 amp (at 4 ohms; 300W at 8 ohms) features a tube preamp that will break up just the way you want it to, and a newly designed limiter that produces glorious distortion instead of cramping your style. The simple 4-band EQ gives you all you need to access a wide range of sounds for any genre. As far as controls, the Gain knob is for the amount of tube overdrive, whereas the Master knob is for your volume.
Little Mark Tube 500W solid state/tube Head
The Little Mark Tube gives the warmth and richness of a tube preamp, or the clean attack of a solid state preamp… or a mix of both! Additional features include solid-state/tube mix control, four bands of equalization, VLE and VPF filters, line out level control, pre-post EQ switch for the XLR out (on rear panel), and mute control (push-pull on the master knob).
TTE 500 500W tube Head
"Modern Vintage" may seem to be an oxymoron, but it sums up the unique new TTE 500 well. Current technology is brought together with classic tone concepts in a head that looks and sounds vintage—but features some special adaptations of the innovations that put the Markbass on the map! The classic sound comes from an old-style tube preamp, a tube compressor, a simple 3-band passive EQ section, a "Color" filter (a tube adaptation of the famous Markbass VLE control), and an innovative Tube Technology Emulator power amp.
MoMark with T1M-HE preamp, EQ7G tone control and MVVL-HE master control
The awesome high-end components and gold-plated circuits of the T1M-HE tube preamp module give it an exceptional sound fidelity. Its tube glorifies the harmonics, reproducing every detail of the instrument's tone with exceptional definition, offering tube warmth without distortion. This module also features a handy mute switch.
The stylish Eq7G module features seven bands of graphic equalization, set at 40 Hz, 80 Hz, 250 Hz, 400 Hz, 1 kHz, 2 kHz, and 4 kHz. Illuminated by yellow LEDs, this graphic EQ allows you to "see" your tone shaping on any dark stage!
This high-end MoMark module features master volume control, the trademark Markbass VLE and VPF filters, and Line Out level control. Gold-plated circuitry and the highest level of components make the MVVL-HE the master module of choice for discriminating "audiophile" bassists. This module completes the "high end" set of MoMark modules, along with the T1MHE and S1M-HE preamp modules and the EQ44S-HE EQ module.
![]() | ![]() | ![]() |
---|---|---|
STD 151HR rear-ported 1x15" |
STD 104HR rear-ported 1x15" |
STD 104HF front-ported 4x10" |
![]() | ![]() | ![]() |
---|---|---|
STD 152HR rear-ported 2x15" |
STD 106HF front-ported 6x10" |
Classic 108 sealed 8x10" |
![]() | ![]() | ![]() |
---|---|---|
New York 804 front-ported 4x8" neodymium |
Traveler 121H front-ported 1x12" neodymium |
New York 122 front-ported 2x12" neodymium |
Mark Studio 2 features a pedalboard which covers any bass player's needs.
![]() |
![]() |
Octaver A synthesizer which produces two extra voices, one octave and two octave below the original. |
Env-Filter The Envelope Filter delivers classic, analog, envelope filter sounds in an easy-to-use and compact pedal designed specifically for bass. |
![]() |
![]() |
Compressor A state-of-the-art tube compression tool which allows you to shape the dynamics of the bass track. |
Distortion By focusing the overdrive in the midrange, it retains low-end thunder and high-end sizzle while distorted mids blaze a path through even the densest mix. |
![]() |
Chorus All-analog pedal using bucket-brigade circuitry to create classically lush, liquid textures that you just can't get with digital circuitry. |
Paolo Costa, bass player and Mark Studio 2 product manager says, "The Mark Studio 2 plug-in has been designed to faithfully simulate the sound of Markbass amplification in any DAW application or live situation. No matter what kind of bass you use, the Mark Studio 2 plug-in will always give you a very musical array of bass sound choices. It's an indispensable tool to anyone who records on a computer and wants to improve the sound of the bass either during or after recording."
Apple System Compatibility
AudioUnits, RTAS (ProTools), AAX64 (ProTools 10, 11, 12) and VST plugins, as well as a standalone application.
Both 32bit and 64bit are natively supported.
You may authorize up to three computers that you own (no hardware key needed).
Apple System Requirements
Macintosh® Intel® Core Duo™ 1.6GHz with 2Gb of RAM, 1280x800 video.
Mac OS X 10.6 Snow Leopard and above are supported.
Windows System Compatibility
Available as VST, RTAS (ProTools) and AAX64 (ProTools 10, 11, 12) plugins, as well as a standalone application.
32bit and 64bit are natively supported.
You may authorize up to three computers that you own (no hardware key needed).
Windows System Requirements
Intel Core i3 1.4GHz with 4Gb of RAM, 1280x800 video.
Windows® Vista, Windows 7, 8, and 10 are supported.